• polished
• 2.50 Ø 10"
• offset (ET): 1mm
• pitch circle diameter (PCD): 5/220mm
• center bore (CB): 202mm
• open, tubeless
• Aluminum low-pressure casting
• valve pre-mounted
• homologation: KBA 53463

With the new SIP 2.0 Tubeless rim, tyres can be ridden without an inner tube. In case of damage, a sudden loss of air is prevented, the air pressure drops slowly. Burst tubes are a thing of the past. Even a valve rupture or a flat tyre due to the inner tube becoming trapped are a thing of the past. The design as a tubeless double hump rim prevents the tyre from sliding into the rim bed in case of air loss.

• High manufacturing precision and quality
• Exact concentricity
• Perfect surface finish & pre-mounted valve
• Also available with pre-mounted tyre

The advantages of the SIP rim at a glance

• 2.50-10, the ideal size for 100'80 and 100'90 tyres
• Compared to the 2.10 inch rim, the rim has a minimal, but negligible, left-sided track offset. If the rim is used on both front and rear wheels, there is no offset. Then there is only a minimal eccentricity. All tyres from 3.00/3.50 to 100/90-10 fit on this rim.
• Fits all 10" brake drums, including PX'98 star brake drums and GRIMECA disc brake drums.
• With cut-out for the ABUS rim lock.
• With ABE